Threading The Label Roll At The Dispensing Edge - Avery Dennison ALS 204 User Manual

3 B
EFORE OPERATION
3.2 I
NSERTING LABEL MATERIAL
Threading the label roll at the dispensing
edge
Fixed [39] (standard) and pivotable L-Shape dispen-
sing edges:
Unroll around 1 m of label strip and remove the
labels from it.
Pass the backing paper around the first deflection
roller [39A] and through the slot in the sensor [39B].
Feed the backing paper under the pressure roller
[39C] to the dispensing plate [39D].
Feed the backing paper around the dispensing plate
to the second deflection roller [39E].
Spring loaded [40] and pneumatic [41] L-Shape dispen-
sing edges:
Additionally pass the backing paper between the
two slim deflection rollers at the joint [40A] [41A].
A
[41] Path of the label strip at the pneumatic dispensing edge (option).
E
A
[39] Path of the label strip at the dispensing edge.
A 1st deflection roller
B Label sensor
C Pressure roller
D Dispensing plate
E 2nd deflection roller
A
[40] Path of the label strip at the spring loaded dispensing edge
(option).
40
A
B
ALS
20x
256
GB
C
D
A