Operating Modes - Avery Dennison ALX 92x Operating Manual

09/06 Rev. 3.06-01
•
Offline mode
Online mode
Message mode
OPERATING MANUAL
For stepping back through the parameter menu and/or exiting it.
For more detailed descriptions of the button functions, please see
– Offline operation auf Seite 12 and
Online operation auf Seite 13
– in "Info-Printouts and Parameters".

Operating modes

Settings can be made when the device is offline. The offline mode is normally
active when the device is switched on. Print jobs are received via the selected
interface but not processed.
OFFLINE 0 JOBS
To configure the device so that it goes directly into online mode when
switched on, set the parameter
In online mode, print jobs are received and processed immediately. Possible
messages:
ONLINE 0 JOBS No jobs are waiting to be processed.
ONLINE 0. JOBS The current data transfer to the device is shown on
ONLINE 13 JOBS
Remainder: 25
ONLINE 13 JOBS
Remainder: endless
To stop printing, press the online button.
The device uses status reports to signal an error or a particular operating sta-
tus. This message mode indicates that the device is waiting to quit or for fault
clearance. When quitting, the device switches from message mode to offline
mode (depending on the error and the progress of the last active process).
Status 5001
No gap found
The status message 5001 (shown above) occurs when for example the de-
vice is set for punched label material, but continuous form material without
punches has been inserted. In this case, the device will continue to feed the
material for a few seconds before it generates an error message.
Status Reports: see topic section „Status Reports".
ALX 92x
No jobs are waiting to be processed.
SYSTEM PARAMETER > Turn-on mode
the display. This is indicated by the dot on the bottom
right next to the number of loaded jobs.
During printing, the display also shows the number
of print jobs read (13) and the remaining number of
labels (25) to be printed in the current job.
If a print job recognises an endless number of labels
to be printed, then the remaining number for this job
is also shown as endless.
Messages are made up of the status number and a
brief descriptive text.
8
Device Description
to "Online".