05/09 Rev. 5.02-01
Operating modes
Offline mode
Settings can be made when the device is offline. The offline mode is normally
active when the device is switched on. Print jobs are received via the selected
interface but not processed.
No jobs are waiting to be processed:
To configure the device so that it goes directly into online mode when switched
on, set the parameter
Online mode
In online mode, print jobs are received and processed immediately. Possible
messages:
OPERATING MANUAL
OFFLINE 0 JOBS
SYSTEM PARAMETER > Turn-on mode
•
No jobs are waiting to be processed:
ONLINE
0 JOBS
•
The current data transfer to the printer is shown on the display. This is in-
dicated by the dot on the bottom right next to the number of loaded jobs.
Another point on half line height above the first shows the interpreter sta-
tus:
– No point: No data to interpete.
– Solid point: The interpreter is busy (still data left in the spooler).
– Flashing point: The interpreter is waiting for data required to complete
a command (no data in the spooler).
ONLINE
0: JOBS
•
During printing, the display also shows the number of print jobs read (13)
and the remaining number of labels (25) to be printed in the current job.
ONLINE
13 JOBS
Remainder: 25
•
If a print job recognises an endless number of labels to be printed, then the
remaining number for this job is also shown as endless.
ONLINE
13 JOBS
Remainder: endless
To stop printing, press the online button.
ALX 92x
Device Description
to "Online".
11