License Management; Requirements; Configuration Process - Avaya 3616 Installation And Configuration Manual

6. License Management

The 3616/26 Wireless IP Telephone system supports a number of different IP protocol integrations.
All 3616/26 series Wireless Telephones are shipped from Avaya with a generic software load that
allows them to associate to a wireless LAN and download their functional software from a TFTP
server. The Wireless Telephones will not function properly without downloading appropriate
software.
The following details the process to properly configure 3616/26 Wireless IP Telephone and download
software via over-the-air file transfer.

Requirements

• A wireless LAN must be properly configured and operational through the use of 802.11b
wireless access points.
• The Avaya Call Server must also be connected to your network and completely operational.
• A TFTP Server must be available on the network in order to load the appropriate software into
the Wireless Telephones.
• Finally, ensure that the Battery Pack on the Wireless Telephone is fully charged.

Configuration Process

1. Download the latest 3616/26 Wireless IP Telephone – IP software from
http://www.spectralink.com/service/software.php
2. Load the latest version of the 3616/26 Wireless IP Telephone code and place it on the TFTP
Server and ensure the TFTP Server is started. The three files that are needed must be named
slnk_cfg.cfg, pd11ccc.bin, and phintl24.bin.
3. If statically assigning IP addresses, ensure that the
, and
Mask Default Gateway
Server, ensure that the DHCP option is set.. See "3616/26 Wireless IP Telephone
Configuration" section for detailed configuration instructions.
4. Ensure the Wireless Telephone has properly configured
within the Admin Menu. If you are accepting broadcast
handset will automatically learn the ESSID information when powering on. See "3616/26
Wireless IP Telephone Configuration" section for detailed configuration instructions.
5. Using the Admin Menu on the Wireless Telephone, ensure the
set to . This ensures the handset will check for the proper software files each time it powers
009
on. See "3616/26 Wireless IP Telephone Configuration" section for detailed configuration
instructions.
6. Power cycle the Wireless Telephone.
555-301-107, Issue 3
May 2004
.
IP Address
information are accurate in the Admin Menu. If using a DHCP
3616/26 Wireless IP Telephone
Installation and Configuration Guide
,
TFTP Server IP
ESSID and Reg Domain
ESSIDs at your access points, the
License Mngt
,
Subnet
Information
menu option is
25