Avaya 3616 Installation And Configuration Manual page 16

3616/26 Wireless IP Telephone
Installation and Configuration Guide
Admin Menu Items
IP Address
ESS ID
License Management
Restore Defaults
Site Survey Mode
Regulatory Domain
Security
OAI on/off
Admin PW
IP Address
There are two modes in which the Wireless Telephone can operate: DHCP enabled or Static IP. Select
the mode for operation from the IP Address menu:
* Use DHCP : will use Dynamic Host Configuration Protocol to assign an IP address each time
the Wireless Telephone is turned on. If DHCP is enabled, the Wireless Telephone also receives
all other IP address configurations from the DHCP server.
Static IP : allows you to manually set a fixed IP address. If selected, the Wireless Telephone
will prompt for the IP address of each of the configurable network components. When entering
addresses, enter the digits only, including leading zeroes. No periods are required. The left
arrow key (*) can be used as a backspace key to re-do an error. The right arrow (#) key can be
used to advance to the next 3 digit field (10.0.0.8 can be entered as 10,#,#,#,8,END).
16
nd rd
2 Level 3
*Use DHCP
Static IP Phone IP
TFTP Server IP
OAI Server IP
Default Gateway
Subnet Mask
Call Server IP
Call Server Port
AVPP IP
Static Entry
*Learn Once
Learn Always
Set Current
*None
WEP Authentication
WEP On/Off
Key Information
Rotation Secret
Cisco FSR Username
Password
Enable OAI
Disable OAI
th
Level 4
Open System
Shared Key
Default Key
Key Length
Key 1-4
Level
555-301-107, Issue 3
May 2004