The Front Panel Of The Avaya Voice Priority Processor - Avaya 3641 Installation, Configuration And Administration

1.9

The Front Panel of the Avaya Voice Priority Processor

The Avaya Voice Priority Processor's front panel contains ports to connect to power, the
LAN, and to an administrative computer via an RS-232 port. Status LEDs supply
information about the Avaya Voice Priority Processor's functioning.
RS-232
RS-232 Port – male DB-9 connector (DTE) used for RS-232 connection to a terminal,
terminal emulator, or modem for system administration.
Link LEDs:
LNKOK – Lit when there is a network connection.
ACT – Lit if there is system activity.
COL – Lit if there are network collisions
NETWORK – Port to wired (Ethernet) LAN.
ERROR – Lit when the system has detected an error.
STATUS – Indicate system error messages and status.
1 – Heartbeat, indicates gateway is running.
2 – If active calls.
3, 4, 5 – Currently unused.
PWR (power jack) – Connects to the AC adapter supplying power to the system.
Use only the Avaya-provided Class II AC Adapter with output 24VDC, 1A.
Note that the model designation may be found on the label which is on the side of the
AVPP.
L A C E
N C O R
K T L R
O O
NETWORK
K R
.
AVPP Overview
1 2 3 4 5
Status
Issue 1, January 2007
PWR
15