Testing A Wireless Ip Telephone - Avaya 3641 Installation, Configuration And Administration

8.

Testing a Wireless IP Telephone

Verify proper registration and operation of each Wireless IP Telephone by performing the
following tests on each Wireless IP Telephone in an active wireless area.
1. Power on the Wireless IP Telephone by pressing the END key. You will see a series of
messages displayed as the Wireless IP Telephone acquires the system. The Wireless
IP Telephone should display the user extension. Any error messages should clear.
2. Press the START key. The extension number should be replaced by information from
the Avaya Communication Manager and you should hear a dial tone. Place a call and
listen to the audio quality. End the call by pressing the END key.
3. Place a call to the Wireless IP Telephone and verify ring, answer, clear transmit and
clear receive audio.
4. Press the START key.
5. Use the softkeys and the FCN key to verify all programmed features on the Wireless IP
Telephone, and press END when finished.
6. Use the LINE key to verify the programmed line appearances, and press END when
finished.
7. Press the END key. Any line indicators should turn off and the extension number
display will return.
Testing a Wireless IP Telephone
Issue 1, January 2007 63