The View Administrative Option - Avaya one-X Deskphone Edition Installation And Maintenance Manual

Local Administrative Options
Use the following procedure to set the Site-Specific Option Number (SSON).
1. When you select SSON... from the Admin Procedures Screen, the following text displays:
Setting:
where the setting is the current system value of DHCP_SSON.
2. To change the setting, press the appropriate softkey(s) and use the dialpad to enter a valid
SSON value between 128 and 255.
3. Press Save to store the new setting and redisplay the Admin Procedures screen.

The View Administrative Option

If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
Note:
Unless otherwise prevented using administration, the user can view but not
Note:
change most of the parameters associated with Craft Local Procedures. For
more information about this option, see the applicable user guide(s).
Note:
If the View Network Information option is not available due to being disabled by
Note:
administration, use the ADDR option to view IP Addresses. See
Addressing Installation
incorrectly. Verify whether you were provided with correct IP Addresses.
44 9600 Series SIP IP Telephones Release 2.0 Installation and Maintenance Guide
on page 32. The IP Addresses might have been entered
Static