Table of Contents
Advertisement
Configuration Control
TVIS-7º Configuration
Communications Port: The serial communication settings should match those on the PC for
communication. The Pelco Address is also displayed. On initial power up, the system will
automatically search for the appropriate baud rate. This dialog configures the PC comm. Port
that will be used to communicate with the device.
• Serial Port – select the port which has a physical connection to the device
• Baud Rate – select the desired baud rate. If the device is configured for a different rate,
the software will hunt until it determines the correct rate. Once connected it will
request that the device change to the rate selected by the user.
• Pelco Address – this is the address that the User Interface will use to communicate
with the device. It must either match the address configured in the device or use the
global value of "99".
Logging The logging will open a window that a message log for each command sent to the
TVIS-7°. If Log Send/Recv is selected, then all messages sent between the host and the device
will be logged. If Enable Logging is exclusively selected, only error messages will be display.
This window is useful in resolving technical issues. The data from the window can be copied
and pasted to a text file using the right mouse button.
427-0014-00-10 Revision 150
Copyright © 2007 FLIR Systems, Inc.
38
Advertisement
Table of Contents
