Table of Contents
Advertisement
9.0 SR-SERIES CAMERA SPECIFICATIONS
Feature
VSR-6
FPA size (HxV)
160x120
Weight
4.6 lbs, 2.1
kg
Dimensions
Refer to detailed drawings below in section 9.1
Sensor type
Uncooled Microbolometer
Spectral range
7.5 to 13μm
Pixel pitch
38 microns
Input power
14V to 32VDC
range
18V to 27VAC
Nominal/Peak
6/16 W at 24VDC
Power Req.
Operating
-32°C to 55°C (-25°F to 131°F)
Temp. Range
Storage
-50° to 85°C
Temperature
Lens Heater
Thermostat controlled
Analog video
NTSC or PAL (EIA-170 or CCIR 624, respectively).
Camera focus
Fixed focus (no adjustment needed)
Minimum
0.1 meters
Focus
Serial remote
RS-232
interface
User Control
Via devices supporting Pelco-D protocol or Windows-based
application program (Windows-based GUI)
Connector
Screw terminals (accepts tinned wire leads)
Style
Note: These specifications are subject to change without notice. Additional SR-100P
specifications provided in section 9.2
427-0014-00-10 Revision 150
SR-19
SR-35,
SR-50
320x240
320x240
4.6 lbs,
5.0 lbs,
2.1 kg
2.7 kg
Voltages as measured at the input to the electrical
interface board.
4/6 W at
24VDC
0.1 meters 1 meter,
4 meters
SR-100P
Specifications.
Copyright © 2007 FLIR Systems, Inc.
SR-100
SR-100P
320x240
320x240
7.2 lbs, 3.3
11.5 lbs, 5.2
kg
kg
8 /36 W at
8 /36 W at
24VDC
24VDC
Motorized focus mechanism
7 meters
7 meters
RS-422 (RS-
RS-422
232 avail.)
16-pin mating
connector
28
Advertisement
Table of Contents
