Hand-Held Operation; Head Mounted Operation - ATN ODIN Operator's Manual

3.2.3. HAND-HELD OPERATION

NOTE
When using the monocular without a mounting device, make
sure to place the neck cord around your neck.
(1) Ensure that the battery are installed per paragraph 2.1.1.
(2) Turn the ON-OFF switch to ON.
NOTE
The sharpest image will be observed only when the objective
lens and eyepiece lens are properly focused.
(3) Rotate the diopter adjustment for the clearest view of the image
intensifier screen.
(4) The objective lens is set at fixed focus.
(5) The objective lens houses the Variable Pivot Technology mod-
ule. The VPT allows the user to rotate the screen to match the angle
of the Odin. To do this grab the front lens objective and rotate either
clockwise or counterclockwise to the image is at desired location.
You can also electronically rotate the icon position in your scope.
Select the rotate icon and then adjust through the menu buttons.

3.2.4. HEAD MOUNTED OPERATION

Perform the following procedures for head mounted operation.
(1) Ensure that battery is installed per paragraph 2.1.1.
(2) Read the instructions on how to use the headmount in para-
graph 2.1.4.
NOTE
To make it easier to align the monocular, eyecup, and eyepiece
lens to the eye, depress the eye relief adjustment and slide
the headmount socket all the way forward before attaching the
monocular.
(3) Align the headmount/helmet mount adapter's latch to the head-
mount socket (Figure 3.4.). Press and hold down the latch lever
while installing the monocular into the headmount socket.
Release the latch when the monocular fully engages the socket.
(4) Set your eye relief by depressing the eye relief adjustment
3-11