General Information; Scope; Reports; Storage - ATN ODIN Operator's Manual

Thermal multi-purpose system

Table of Contents

1.1 GENERAL INFORMATION

This manual contains instructions for use in operating and main-

taining the ATN Odin thermal multi-purpose systems. Throughout

this manual, the ATN Odin will be referred to as the scope or Odin.

Reports from the user on recommendations for improvements are

encouraged. Send reports to the address below.

American Technologies Network Corp.

Storage of Odin should be done in the factory packing and after a

thorough PMCS as outlined in Section 4.1. of this manual. This will

ensure the scope remains in mission ready condition during stor-

age. Battery should be stored separately from the scope.

The scope should not be placed on the floor, in any area exposed to

high temperatures or direct sunlight. Presence of acid and alkaline

vapor, as well as of other aggressive admixtures in the air is unac-

ceptable.

ONE YEAR PRODUCT WARRANTY

This product is guaranteed to be free from manufacturing defects in material

and workmanship under normal use for a period of 1 (one) years from the date

of purchase. In the event a defect that is covered by the foregoing warranty

occurs during the applicable period stated above, ATN, at its option, will either

repair or replace the product, and such action on the part of ATN shall be the

full extent of ATN's liability, and the Customer's sole and exclusive remedy.

1-2

1341 San Mateo Avenue

South San Francisco, CA 94080

(800) 910-2862

(650) 989-5100

(650) 875-0129 fax

info@atncorp.com

www.atncorp.com

Table of Contents