ATN ODIN Operator's Manual page 30

(4) Check the position of the monocular by holding the weapon in
your normal firing position. Adjust the fore/aft position of the mon-
ocular as necessary by loosening the clamping knob and reposi-
tioning the weapon mount on the weapon's mounting rail.
(5) To align the image you are viewing. Turn unit on (page 3-4, sec-
tion 3.2.1) and while viewing the screen rotate the "Variable Pivot
Technology adjustment (VPT)" to get image aligned. Please note
that the VPT adjustment does not fully Rotate 360 degrees. Icons in
OLED display may also be rotated proper alignment. Please refer to
section 3.2.2.3 Third Menu Set (page 3-6).
2-10