ATN ODIN Operator's Manual page 47

case are free of dirt, dust, and moisture.
• The monocular and helmet mount should not be left on the
helmet when the helmet is removed.
(e) Refer to Figure 1.1. for proper placement of demist shield,
battery, carrying case strap, lens paper, manual, browpads, head-
mount, helmet mount, headmount/helmet mount adapter and
weapon mount.
(f) Place the monocular into the shallow pocket of the carrying
case.
(g) Place the carrying case into the shipping and storage case,
close and latch (Figure 1.3.).
(h) Return to storage area.
3.2.8. VARIABLE PIVOT TECHNOLOGY
To align the image you are
viewing.
You can align the image to a
desired angle by rotating the
"Variable Pivot Technology
adjustment (VPT)".
Turn unit on (page 3-4, sec-
tion 3.2.1) and while viewing
the screen rotate the "Vari-
able Pivot Technology ad-
justment (VPT)" to get image
aligned. Please note that the
VPT adjustment does not
fully Rotate 360 degrees.
Icons in OLED display may
also be rotated proper align-
ment. Please refer to sec-
tion 3.2.2.3 Third Menu Set
(page 3-6).
FRONT LENS RING
FIGURE 3.14. VPT
3-17