Operating Procedure; Turning On; Menu Sets - ATN ODIN Operator's Manual

3.2. OPERATING PROCEDURE

This section contains operating procedures for using the Odin as
hand-held, head mounted, helmet mounted or weapon mounted
monocular. Prior to operating the monocular, make certain that all
the steps in 2.3.3. Assembly and Preparation for Use, have been
read and performed.

3.2.1. TURNING ON

Open the objective lens cover. The objective lens cover protects
the monocular from inadvertent exposure to extremely high levels
of radiant flux. Never leave the monocular with the objective lens
cover off. To turn the unit on rotate clockwise the ON/OFF switch.
After a warm-up time of approximately 4 seconds, video of the
thermal scene appears.

3.2.2. MENU SETS

The first set of menus appears when you turn on the device. For
menu change press ENTER button to cycle through the available
menu sets. Each menu contains two icons that indicate various
scope functions. To access a particular icon please use UP or
DOWN buttons.
DOWN BUTTON
ENTER BUTTON
UP BUTTON
FIGURE 3.2. OPERATIONAL BUTTONS OF ODIN
3-4