Sip Config - ATCOM AT800 Quick Start Manual

AT800 Quick Start
AT800 AT800 AT800 Quick Quick Quick Start Start Start Guide
Use Use Static Static IP: IP:
Use Static Use Static IP: IP:
----Select "Static";
----Enter the AT800's IP address in the "IP address" field.
----Set the "Subnet Mask", default 255.255.255.0
----Enter the AT800's upper gateway IP address (for example: Router) in
the "Default Gateway" field
----Key in the DNS information in the "Primary DNS" and "Secondary DNS"
fields.
Use Use PPPoE: PPPoE:
Use PPPoE: Use PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE
server (option), Username and password.
Then connect AT800 to the Ethernet port of the modem, it will connect to the
internet through PPPoE, and automatically obtain the IP address, Subnet
Mask, Default Gateway, Primary DNS and Secondary DNS information.
Click <Submit> button on webpage to save the change and make a auto
reboot.
2.2 2.2 SIP SIP Config Config
2.2 2.2 SIP

SIP Config

Config
2.2.1 2.2.1 SIP SIP server server config config
2.2.1 2.2.1 SIP SIP server server config config
Account � � � � Account
Account Account
Account
Enter
ATCOM TECHNOLOGY CO., LIMITED
Guide
Guide Guide
Account Account
Account
setting page and set the sip information