Sip Config - ATCOM AT-640 Quick Start Manual

A A A A T-640 T-640 Quick Start
T-640 T-640 Quick Quick Quick Start Start Guide Start
B B B B 、 、 、 、 SIP
SIP SIP Config Config

SIP Config

Config
VoIP � � � � SIP
VoIP SIP
VoIP VoIP SIP SIP Config
Enter
Addr: sip server address;
----Register ----Register Server Server Addr Addr
----Register Server ----Register Server Addr
----Register ----Register ----Register ----Register Server Server Server Server Port Port Port Port
Username : username of your sip account;
----Register ----Register Username ----Register ----Register Username Username
Password : password of your sip account;
----Register ----Register Password Password
----Register Password ----Register
-Register Number
----Register -Register Number -Register Number Number
if none
---- --- --- ---check check Enable Register
check check Enable Enable Register Enable Register Register；
Then you can make VoIP calls if the WAN and SIP config is correct.
Notice: Please go to the "Config Manage" and save the config, otherwise you will lose the setting Notice: Notice:
Notice:
after device reboot.
ATCOM TECHNOLOGY CO., LIMITED
Guide
Guide Guide
Config
Config Config
setting page and set the sip information
: sip server register port;
: Phone number of your sip account; the same as username