Sip Config - ATCOM AT-610 Quick Start Manual

AT-610 Quick Start Guide
B、SIP Config
Enter setting page and set the sip information
VoIP
----Register Server Addr: sip server address;
: sip server register port;
----Register Server Port
----Register Username : username of your sip account;
----Register Password : password of your sip account;
: Phone number of your sip account; the same as username
----Register Number
if none
----check Enable Register；
Then you can make VoIP calls if the WAN and SIP config is correct.
Notice: Please go to the "Config Manage" and save the config, otherwise you will lose the setting
after device reboot.
ATCOM TECHNOLOGY CO., LIMITED