Power On; Connect To Network - ATCOM AT800 Quick Start Manual

AT800 Quick Start
AT800 AT800 AT800 Quick Quick Start Quick Start Start Guide
1 1 1 1 、Installation
Installation Installation Installation and and and access and
Installation:
Using AT800 as below scene:
A T8 0 0
P C
1.1 1.1 1.1 1.1 Power Power

Power on

Power on on on
1. Plug in network cable at LAN port.
2. Plug in the power jack with DC 12V/500mA.
3. All Leds will be lighted once and then turn off.
4. After a absolute boot up, login led will be lighted in red and AT800 comes
into stand by mode.
1.2 Connect Connect to to to to network network
1.2 1.2 1.2 Connect Connect network network
1. Connect your PC to PC port using DHCP mode.
2. Your PC should obtain an IP address in default net settings, mostly like
192.168.10.20.
ATCOM TECHNOLOGY CO., LIMITED
Guide
Guide Guide
access access access
S w i t c h
A T8 0 0
A T8 0 0
Internet
SIP Server