ATCOM AT800 Quick Start Manual
Hide thumbs
Also See for AT800:
- User manual (45 pages) ,
- Quick start manual (7 pages) ,
- Quick manual (2 pages)
Advertisement
Quick Links
All manuals and user guides at all-guides.com
AT800
AT800
AT800 Quick
AT800
Quick
Quick
Quick Start
Start Guide
Start
Start
Guide
Guide
Guide
AT800
AT800
AT800 Quick
AT800
ATCOM TECHNOLOGY CO., LIMITED
Quick
Start
Guide
Quick Start
Quick
Start Guide
Start
Guide
Guide
Version 1.0
2013-01-15
Advertisement
Related Manuals for ATCOM AT800
Summary of Contents for ATCOM AT800
-
Page 1: Quick Start
All manuals and user guides at all-guides.com AT800 AT800 AT800 AT800 Quick Quick Quick Quick Start Start Start Start Guide Guide Guide Guide AT800 Quick Start Guide AT800 AT800 AT800 Quick Quick Quick Start Start Start Guide Guide Guide Version 1.0 2013-01-15 ATCOM TECHNOLOGY CO., LIMITED... - Page 2 Guide Guide Catalog Catalog Catalog Catalog 1、Installation and access......................3 1.1 Power on........................3 1.2 Connect to network......................3 2、Configure AT800 to make VoIP calls..................4 2.1 LAN Config........................4 2.2 SIP Config ........................5 3、Login indicator........................7 ATCOM TECHNOLOGY CO., LIMITED...
-
Page 3: Connect Network
2. Plug in the power jack with DC 12V/500mA. 3. All Leds will be lighted once and then turn off. 4. After a absolute boot up, login led will be lighted in red and AT800 comes into stand by mode. - Page 4 PPPoE. You can use either of these IP types to connect the internet. Use DHCP: DHCP: DHCP: DHCP: ----Select DHCP If you have a DHCP server in your network, AT800 will automatically obtain the network information from your DHCP server. ATCOM TECHNOLOGY CO., LIMITED...
- Page 5 ----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server (option), Username and password. Then connect AT800 to the Ethernet port of the modem, it will connect to the internet through PPPoE, and automatically obtain the IP address, Subnet Mask, Default Gateway, Primary DNS and Secondary DNS information.
- Page 6 1. If [Remember account] is set to no, user needs a manual login on LCD every time the phone restarts. 2. After the restart, it will enter idle state and login led will be lighted in red. ATCOM TECHNOLOGY CO., LIMITED...
- Page 7 AT800 AT800 AT800 AT800 status status status status Red/flashing LAN disconnected Red/stable SIP unregister SIP register ok Then you can make calls when the LAN and SIP config are both correct. AT800 just supports headset calls. ATCOM TECHNOLOGY CO., LIMITED...