Table of Contents
Advertisement
4.10.2.1 Basic
Add
1.
Click
button.
2.
Management VLAN ID: it is used for remote management security. Only the port of VLAN group
ID is equal to the Management VLAN ID can remote management that include telnet, SNMP, and
Web browse the switch. Fill the specific VLAN ID number in Management VLAN ID column and
mark the check box, and then click
VLAN ID is 101, the VLAN group ID 101 includes the port 1, 2, and 4. Therefore, only port 1, 2, and
4 can remote management the switch. And, if the port is in two different VLAN groups and one of
VLAN group ID is equal to the assigned Management VLAN ID, it still has the right to remote
management the switch.
3.
Group Name: assign a name for the new VLAN.
4.
VLAN ID: fill in a VLAN ID (between 2-4094). The default is 1.
5.
From the Available ports box, select ports to add to the switch and click
802.1Q VLAN interface
button to enable the function. For example: the management
Add
button.
Advertisement
Table of Contents
