Installing A 800S; Desktop Installation - Planet GSD-800S User Manual

2.1.4 GSD-800S rear panel
The rear panel of the Switch indicates an AC inlet power socket, which accepts input
power from 100 to 240VAC, 50-60Hz.
Power Notice:
1. The device is a power-required device, it means, it will not work till it is pow-
ered. If your networks should active all the time, please consider using UPS
(Uninterrupted Power Supply) for your device. It will prevent you from network
data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect
your switch from being damaged by unregulated surge or current to the Switch
or the power adapter.
2.2 Installing a GSD-800S
This part describes how to install your GSD-800S Gigabit Ethernet Switch and make
connections to the switch. Please read the following topics and perform the procedures in
the order being presented.
PLANET GSD-800S Gigabit Ethernet Switch do not need software configuration. To install
your GSD-800S on a desktop or shelf, simply complete the following steps.

2.2.1 Desktop Installation

To install a GSD-800S on a desktop or shelf, simply complete the following steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the switch.
Step2: Place the GSD-800S on a desktop or shelf near an AC power source.

NOTE:
Step3: Keep enough ventilation space between the switch and the surrounding objects

NOTE:
Step4: Connect your GSD-800S to network devices
6
Figure 2-2 Rear Panel of GSD-800S
Optional rack-ear for 10-inch cabinet rack mounting (RKE-10A)
and 19-inch cabinet rack mounting (RKE-10B) is available upon
request.
When choosing a location, please keep in mind the environ-
mental restrictions discussed in Chapter 1, Section 4, Product
Specification.