Planet GSD-800S User Manual page 11

A. Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports
on the front of the GSD-800S.
B. Connect the other end of the cable to the network devices such as printer serv-
ers, workstations or routers etc.

NOTE:
Step5: Supply power to the Switch.
A. Connect one end of the power cable to the GSD-800S
B. Connect the power plug of the power cable to a standard wall outlet.
When the GSD-800S receives power, the Power LED should remain solid Green.
Connection to the Switch requires UTP Category 5 network
cabling with RJ-45 tips. For more information, please see the
Cabling Specification in Section 4, Specification.
7