General - Planet GSD-800S User Manual

3.1.3 Login
Login is required to access the command console after the system start up successfully.
The factory default password is "admin". You may change it in the Console command
group. To access to the Console interface, please always enter the correct password. (See
Figure 3-2)

3.2 General

3.2.1 Command Hierarchy
The CLI is hierarchical with two levels: a top level and a group level. The group level
consists of the following groups:
● System
● Console
● Port
● MAC
● VLAN
● Aggr
● QoS
● Mirror
● IP
At top level you may enter a command and by giving the full command string, including
group, or you may change context into a group by entering the name of the group.
At group level you may enter commands for the particular group you have chosen
without specifying the group name or you may return to the top level by entering the up
command. The current level and group is indicated by the prompt. If you are at the top
level, the prompt will be:
>
Figure 3-2 GSD-800S Login Screen
9