Related Manuals for Planet GSD-808HP
Summary of Contents for Planet GSD-808HP
- Page 1 8-Port 10/100/1000Mbps 802.3at PoE Desktop Switch GSD-808HP / GSD-808HP2 User’s Manual...
-
Page 2: Fcc Warning
Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose. -
Page 3: Ce Mark Warning
Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET 8-Port 10/100/1000Mbps 802.3at PoE Desktop Switch User's Manual For Models: GSD-808HP & GSD-808HP2 Revision: 2.1 (JUNE, 2012) Part No.: 2350-A35130-002... -
Page 4: Table Of Contents
Table of Contents 1. Introduction ....................5 1.1 Checklist ....................5 1.2 Product Description ................. 5 1.3 Features ....................6 1.4 Specification ................... 7 2. Hardware Description ................... 9 2.1 Front Panel .................... 9 2.1.1 LED Indicators ................9 2.2 Rear Panel ....................10 2.3 Desktop Installation ................11 2.4 Rack Mounting ..................12 2.5 Product Application ................14... -
Page 5: Introduction
PoE power than conventional 802.3af PoE currently. The 8 Gigabit High Power PoE ports in the GSD-808HP / GSD-808HP2 support both 802.3af and 802.3at PoE standards and allows users flexibly connect standard and high powered devices simultaneously, the GSD-808HP offering 130 Watts PoE budget, eight 15.4 Watts IEEE 802.3af devices or four 30 Watts IEEE 802.3at... -
Page 6: Features
GSD-808HP / GSD-808HP2 front panel, it call “PoE Power Usage” and its meaning of lower to upper LED is 25%, 50%, 75% and 95%. With these LED indications, you can monitor current PoE power used status of GSD-808HP / GSD-808HP2 easily and efficiently. -
Page 7: Specification
GSD-808HP provide 130 Watts PoE budget, GSD-808HP2 provide 240 Watts PoE Budget Over Temperature Protection support Auto detect powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100m Switching Hardware based 10/100/1000Mbps Auto-Negotiation and Auto MDI/MDI-X... - Page 8 Switch Architecture Store and Forward switch architecture MAC Address Table 8K MAC address table with Auto learning function Switch Fabric 16Gbps Switch Throughput 11.9Mpps Jumbo Packet Size 9K Bytes Back pressure for Half-Duplex. Flow Control IEEE 802.3x Pause Frame for Full-Duplex AC 100~240V, 50/60Hz, AC 100~240V, 50/60Hz, Power Requirement...
-
Page 9: Hardware Description
2. Hardware Description 2.1 Front Panel The Front Panel of the GSD-808HP / GSD-808HP2 PoE Ethernet Switch consists of 8x Auto-Sensing 10/100/1000Mbps Ethernet RJ-45 Ports. The LED Indicators are also located on the front panel of the GSD-808HP / GSD-808HP2. -
Page 10: Rear Panel
2.2 Rear Panel The rear panel of the GSD-808HP / GSD-808HP2 indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50-60Hz, 1.5A (GSD- 808HP) / 1.25A (GSD-808HP2) and has a fan hole on the rear panel. -
Page 11: Desktop Installation
RJ-45 1000Base-T Cat.5/5e/6 UTP, 2-pair RJ-45 Any Ethernet devices like hubs/ PCs can connect to the GSD-808HP / GSD-808HP2 by using straight-through wires. The eight-10/100/1000Mbps ports are auto-MDI/ MDI-X can be used on straight-through or crossover cable. 2.3 Desktop Installation... -
Page 12: Rack Mounting
Step 4: Connect your Switch to 802.3at / 802.3af complied Power Devices (PD) and other network devices. A. Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports on the Front of the Switch. B. Connect the other end of the cable to the network devices such as printer servers, workstations or routers…etc. - Page 13 Step 3: Secure the brackets tightly. Step 4: Follow the same steps to attach the second bracket to the opposite side. Step 5: After the brackets are attached to the Switch, use suitable screws to securely attach the brackets to the rack, as shown in Figure 2-6. Figure 2-6: Mounting the Switch in a Rack Step 6: Proceeds with the steps 4 and steps 5 of session 2.3 Desktop Installation to connect the network cabling and supply power to your...
-
Page 14: Product Application
2.4GHz 802.11n Figure 2-7: End Node or Switch Connection Cable distance for Switch The cable distance between the GSD-808HP / GSD-808HP2 and other network equipments should not exceed 100 meter for UTP/ STP cable. Make sure the wiring is correct It can be used Category 3/4/5 cable in 10Mbps operation. -
Page 15: Ip Office
With the business office expansion, the additional telephones required could be installed in less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET GSD-808HP / GSD- 808HP2 802.3at Desktop PoE Switch helps enterprises to create an integrated data, voice, and powered network. -
Page 16: Power Over Ethernet Powered Device
- no need electrician to install AC sockets. 30 Watts Since the GSD-808HP / GSD-808HP2 per PoE port supports 52V DC PoE power output, please check and assure the Powered Device (PD) acceptable DC power range is from 52V DC. Otherwise, it will Note damage the Powered Device (PD). -
Page 17: Power Over Ethernet Overview
3. Power over Ethernet Overview What is PoE? The PoE is an abbreviation of Power over Ethernet; the PoE technology means a system to pass electrical power safely, along with data on Ethernet UTP cable. The IEEE standard for PoE technology requires Category 5 cable or higher for high power PoE levels, but can operate with category 3 cable for low power levels. - Page 18 (although IEEE 802.3af refers to it as endpoint). Otherwise, if it's an intermediary device between a non PoE capable switch and a PoE device, it's called a Mid-span. An external PoE injector is a Mid-span device. Powered device A powered device (PD) is a device powered by a PSE and thus consumes energy. Examples include wireless access points, IP Phones, and IP cameras.
- Page 19 The data pairs are used. Since Ethernet pairs are transformer coupled at each end, it is possible to apply DC power to the center tap of the isolation transformer without upsetting the data transfer. In this mode of operation the pair on pins 3 and 6 and the pair on pins 1 and 2 can be of either polarity.
-
Page 20: Troubleshooting
Solution: 1. Please check the cable type of the connection from GSD-808HP / GSD-808HP2 to the other end. The cable should be an 8-wire UTP, Category 5 or above, EIA568 cable within 100 meters. A cable with only 4-wire, short loop or over 100 meters, all will affect the power supply. -
Page 21: Appendix A Networking Connection
Appendix A Networking Connection A.1 PoE RJ-45 Port Pin Assignments PIN NO RJ-45 POWER ASSIGNMENT Power + 1 2 3 4 5 6 7 8 Power + Power - Power - A.2 Switch's Data RJ-45 Pin Assignments - 1000Mbps, 1000Base-T PIN NO MDI-X BI_DA+... -
Page 22: 10/100Mbps, 10/100Base-Tx
A.3 10/100Mbps, 10/100Base-TX When connecting your Switch to another Fast Ethernet switch, a bridge or a hub, a straight or crossover cable is necessary. Each port of the Switch supports auto-MDI/ MDI-X detection. That means you can directly connect the Switch to any Ethernet devices without making a crossover cable. - Page 23 There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight cable and crossover cable connection: SIDE 1 SIDE 2 Straight Cable 1 = White/Orange 1 = White/Orange SIDE 1 2 = Orange 2 = Orange...
-
Page 24: Ec Declaration Of Conformity
EC Declaration of Conformity For the following equipment: *Type of Product: 8-Port 10/100/1000Mbps 802.3at PoE Desktop Switch *Model Number: GSD-808HP, GSD-808HP2 * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)