Planet GSD-800S User Manual page 25

tagged frames. In port mode, the default class is used as the port priority. In
the other modes, the default class is used for non-IP frames and IP frames
with options.
[<portlist>]: Port list (default: All ports).
[<class>] : Internal class of service (default: Show class).
QoS Tagprio
Syntax:
QoS Tagprio [<portlist>] [<tagpriolist>] [<class>]
Description:
Set or show the VLAN user priority mapping.
[<portlist>] : Port list (default: All ports).
[<tagpriolist>]: VLAN user priority list, 0-7 (default: All user priorities). [<class>] :
Internal class of service (default: Show class).
QoS DiffServ
Syntax:
QoS DiffServ [<dscplist>] [<class>]
Description:
Set or show the IP Differentiated Services mapping.
[<dscplist>]: IP DSCP list, 0-63 (default: All DSCP values).
[<class>] : Internal class of service (default: Show class).
3.3.8 Mirror Commands
Mirror Configuration
Syntax:
Mirror Configuration
Description:
Show the mirror destination port and mirror mode for source ports.
Mirror Port
Syntax:
21