Commands - Planet GSD-800S User Manual

<vid> VLAN ID: Decimal number in the range 1-8. The keyword all
can be used to specify all VLAN IDs.
<vidlist> Comma and/or dash separated VLAN ID list. This type can be
used for specifying individual VLAN IDs or a range of VLAN
IDs. The keyword none can be used to specify an empty
VLAN ID list. Example: 1,2,4-6
<class> Internal class of service.4 queues: low | normal | medium |
high
The <portlist> type is very useful when setting up multiple ports in the same mode. For
example, the following commands will divide the ports into two untagged VLANs:
vlan add 1 1-4
vlan add 2 5-7
vlan pvid 1-4 1
vlan pvid 5-7 2

3.3 Commands

3.3.1 System s Commands
System Configuration
Syntax:
System Configuration [all]
Description:
Show system name, software version, hardware version and management
MAC address. Optionally show the full configuration
[all]: Show the total switch configuration (default: System configuration only).
System Restore Default
Syntax:
System Restore Default [keepIP]
Description:
Restore factory default configuration.
[keepIP]: Preserve IP configuration (default: Not preserved).
System Name
Syntax:
12