Module Led Indicators; Dual Power Leds - Planet FGSW-008 User Manual

2-3 Module LED Indicators

All LED status indicators are located on the FRONT panel of the
switches. They provide a real-time indication of system and
operational status. The ports for connections to other devices and
networks are also on the front panels. The following sections provide
descriptions of the LED indicators and ports.

2-4 Dual Power LEDs

There are four LEDs located on the front panel of the Switch. The
LEDs are to indicate dual power supply status (Good or Fail ).
Power Notice:
1. The device is a power-required device, it means, it will not work
till it is powered. If your networks should active all the time,
please consider use an UPS (Uninterrupted Power Supply) for
your device. It will prevent you from network data loss or
network downtime.
2.
In some area, installing a surge suppression device may also help
to protect your hub from being damaged by unregulated surge or
current to the Switch or the power adapter.
6
Figure 2-2. Rear Panel
Gigabit Chassis Switch