Power On - Planet FGSW-008 User Manual

Note: For proper ventilation, allow about 6 inches of
clearance on the front and 6 inches on the back of the
Switch. This is especially important for enclosed rack
installations.
Apply the procedures to stack more RFS switches. To remove a rack,
use a screwdriver for loosening all the screws on the rack and the
stacking brackets from the body.

4-5 Power On

After all network cables are connected, plug the power cord into the
power socket on the back panel and the other end into a power outlet.
Turn the power on using the power switch on the back panel.
Check the front panel Power indicator to see if power is properly
supplied. The switch uses a universal power supply that requires no
additional adjustment.
24
Figure 4-2: Rack Mount the Switch
Gigabit Chassis Switch