Led Indicators - Planet FGSW-008 User Manual

Figure 3-2 DIP-Switch for 8-port 10/100 N-Way Module
If you set DIP to Auto-negotiation, then the other DIP for 100Mbps
and 10Mbps is invalid. If you set DIP to Full-duplex, then to set the
other DIP between 100Mbps and 10Mbps mode.

3-2-3 LED Indicators

There are three types of LED indicators for each of the RJ-45 Ports.
If there is no connection to a port, the corresponding LED indicators
are not lit.
n
100M The LED indicator is green when the corresponding
port is connected to a 100Mbps devices. This LED indicator is
not lit when the corresponding port is connected to a 10Mbps.
n
LK/ACT
connection secured to a device ( Link ) to the corresponding
port . This LED indicator blinks when there is a data
transmission ( Activity ) taking place at the corresponding port.
n
FD/COL
corresponding port is operating in Full-duplex mode. When the
corresponding port is operating in Half-duplex mode, the LED
indicator is not lit.
corresponding port, the LED indicator blinks.
FGSW-008 User's Manual
The LED indicator is green when there is a
The LED indicator is
When collisions are occurring at the
yellow when the
9