Led Indicators - Planet GSD-1222VHP User Manual

„ The detailed Smart LCD description of each item is shown below:
Parameters
30.3W
It means the output power port of the PoE switch.
(example)
It means the port is overloaded corresponding to the PSE, and
OLP
the port stops powering.
It means the port corresponding to the PSE is lightly loaded and
the port stops powering (When the current on the network is less
ULP
than 7.5mA, the PSE thinks the PD has been dialed out and the
port stops powering).
It means the port corresponding to the PSE appears to be short-
SCP
circuited and the port stops powering.
It means the white and blue OFF shows that the port is blocked
OFF
by the menu command.
---W It means the port is without a PD device insert.
---M It means this port does not have data transfers.
<1M It means this port data rate transfers less than 1M.
The white and blue character represents the data transmission
rate while the red character represents the data transmission rate
877M
which is greater than the bandwidth setting, causing power to
(example)
restart the PSE port. If the resumption situation happens for 10
times within 1 hour, the power supply to the port will be cut off.
PB It means power budget.
TB It means total PoE power output information.
PD The number of PDs inserted.

2.1.2 LED Indicators

„ System
LED Color
PWR Green
Description
Lights to indicate that the Switch has power.
Function
17