Table of Contents
Advertisement
Chapter 2. Hardware Description
This chapter mainly describes the hardware of the Switch:
2-1 Physical Description
The Switch is a modular unit, and its chassis contains 8 expansions.
The LEDs are located on the front panel of the Switch to allow you
to monitor the operation and performance at a glance.
The Physical Dimensions of the Switch are:
440mmX 266mmX 133mm (3U height)
2-2 Front & Rear Panel
The front panel of Switch displayed in Figure 2-1 is shown with
8-port 10/100Base-TX Modules, 100Base-FX Modules and Fiber
Gigabit Modules.
Figure 2-1. Front Panel
The 3-pronged power plug and On/off switched are located at the
Rear Panel of the Switch displayed in Figure 2-2. The Switch will
work with AC in the range 100-240VAC, 50-60Hz.
FGSW-008 User's Manual
5
Advertisement
Table of Contents
