Features; Dip-Switch With Link Mode - Planet FGSW-008 User Manual

Note:
Please make sure the version of the module before
slide-in it to the slot.
Use of module FGSW-8TP could cause LED indication
abnormal in FGSW-008. The accepted one is version 2 or
above. The version number can be found besides the
serial number with format: FGSW-8TP (V.x).

3-2-1 Features:

n
8X10/100Mbps N-Way auto-negotiation switch ports
n
Up to 2.4Gbps Backplane forwarding rate
n
2MB memory buffer
n
12K-entry MAC Address Table
n
Store-and-forward technology for abnormal packet filtering
n
Half-duplex and full-duplex modes supported
n
DIP-switches to set the first 4 ports for Auto-negotiation,
100M Full-duplex, or 10M Full-duplex modes
n
LED-indicators for 100M, LK/ACT, FD/COL status

3-2-2 DIP-Switch with Link Mode

The 8-port 10/100-TX switch module provides DIP-switches from 1
th
to 4 to adjust link mode with other network devices. There are three
types of link mode can be chosen, which include Auto-negotiation,
100Mbps/Full-duplex and 10Mbps/Full-duplex. The last 4 ports was
not designed DIP-switches to do any link mode setting, but these
ports support auto-negotiation protocol only.
8 Gigabit Chassis Switch
st