Table of Contents
Advertisement
10 bracket screws, and 4 larger rack-mount screws.
Use a screwdriver to turn the screws on them to secure the racks into
the stacking holes.
Perform the following steps to rack mount the switch:
1.
Position one bracket to align with the holes on one side of the
switch and secure it with the smaller bracket screws. Then
attach the remaining bracket to the other side of the switch.
2.
After attached both mounting brackets, position the switch in
the rack by lining up the holes in the brackets with the
appropriate holes on the rack. Secure the switch to the rack
with a screwdriver and the supplied rack-mount screws.
FGSW-008 User's Manual
Figure 4-1: Attaching Mounting Brackets
23
Advertisement
Table of Contents
