Table of Contents
Advertisement
n
Cauti
on:
n
4-2 Mounting the Switch
The Switch is suitable for use in an office environment where it can
be rack-mounted in standard EIA 19-inch racks or standalone.
4-3 Desktop Mounting
1.
Set the switch on a sufficiently large flat space with a power
outlet nearby, and about the center of all networked devices.
2.
Apply the rubber foot pads to each corner on the bottom of the
switch. These pads cushion the switch against shock /
vibrations.
Caution
Do not place objects on top of the switch.
4-4 Rack Mounting
To stack multiple switches in a standard 19-inch EIA rack, use the
supplied mounting kit. This kit contains 2 side-mounting brackets,
22
Cabling must be away from sources of electrical
noise such as radio, computers, transmitters,
broadband amplifiers, power lines and keep away
from TVs, hair dryers, and microwave.
Air flow around the switch and through its vents
on the rear cannot be restricted.
Gigabit Chassis Switch
Advertisement
Table of Contents
