Led Indicators - Planet GSW-1602SF User Manual

More than 5 seconds

2.1.2 LED Indicators

The front panel LEDs indicates instant status of port links, data activity and system power, helps monitor and troubleshoot
when needed.
LED of GSW-1602SF / GSW-2404SF
LED Color
Green
PWR
1000
Green
LNK/ACT
10/100
Green
LNK/ACT
SFP
Green
LNK/ACT
Reset the Web Smart Switch to Factory Default configuration.
The Web Smart Switch will then reboot and load the default
settings as below:
Lights to indicate that the Switch is powered on.
Lights to indicate that port is successfully connecting to the network at 1000Mbps.
Blinks to indicate that port is receiving or sending data.
Off to indicate that port is successfully connecting to the network at 10/100Mbps.
Lights to indicate that port is successfully connecting to the network at 10/100Mbps.
Blinks to indicate that port receiving or sending data.
Off to indicate that port is successfully connecting to the network at 1000Mbps.
Lights to indicate that port is successfully connecting to the network at 1000Mbps through
SFP interface.
Blinks to indicate that port is receiving or sending data.
Figure 2-3 PLANET GSW-1602SF LED panel
Figure 2-4 PLANET GSW-2404SF LED panel
User's Manual of GSW-1602SF / GSW-2404SF
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
Function
-8-