SmartWare Software Configuration Guide
Introduction
This chapter provides an overview of all CLI commands and modes available. It is organized as follows:
Mode Name
Enter Command
Command 1
...
Exit
Mode Name
...
Several commands contain a lot of parameters and arguments. The command syntax is described as follows:
•
Arguments where you must supply the value are surrounded by <angle brackets>.
•
Optional arguments within commands are shown in square brackets ([ ])
•
Alternative parameters within commands are separated by vertical bars ( | ).
•
Alternative but required parameters are shown within grouped braces ({ }) and are separated by vertical bars
( | ).
Command syntax is illustrated by an example in
Introduction
command { param1 | (param2 <arg>)} [ param3 ]
param1
Key
Key
param2
Key
Sequence
Option
Sequence
Figure 92. EBNF syntax
figure
92.
<arg>
Null-Option
Text
C • Command summary
param 3
Key
576