Configure A Realm; Configure A Domain Name (Optional) - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Don't use a registrar but use the following authentication credentials when the proxy requires client authentica-
tion:
user MY-DEFAULT-USER authenticate name my-name password my-password default
Since the user is not registered, the user-name can directly be used as login-name. Thus the following com-
mand configures the same:
user my-name authenticate my-password default
Example: Register three users to a SIP registrar all using the same authentication credentials:
user 101 register display-name "User1" authenticate name my-name password my-pass-
word
user 102 register display-name "User2" authenticate name my-name password my-pass-
word
user 103 register display-name "User3" authenticate name my-name password my-pass-
word
This can also be expressed as three users without authentication credentials, but with default authentication
credentials specified separately.
user 101 register display-name "User1"
user 102 register display-name "User2"
user 103 register display-name "User3"
user my-name authenticate password my-password default
Configure a realm
If there is more than one service configured on a gateway the realm must be configured on each service. Other-
wise, it is not possible for the gateway to provide the correct credentials to the server, when challenged. The
syntax of the new realm command is as follows:
Mode: gateway sip/service
Step
1
[ name ] (svc-sip)[<name>]# realm <realm-
name>
Configure a domain name (optional)
The domain name is used, if the gateway is part of a SIP domain managed by a SIP server. If configured, the
gateway will use that domain name as the host part of all locally originated SIP from and to headers. If you
have a SIP domain name, you can configure it on the gateway using the following procedure.
Note
Do not confuse the SIP domain name with normal DNS domain names.
Note Never specify an IP address as the domain name.
Gateway configuration task list
Command
40 • SIP gateway configuration
Purpose
Defines the realm valid for this service.
507