Default Server - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Default Server

Additionally, the default server can be set to auto so that actual registrar is always taken as default server. When
both are set to auto, the registration mechanism discovers the registrar and the address of the discovered regis-
trar is also taken as default server. When set to manual, the default server can be set to a fixed address.
Mode: gateway sip <gateway>/service <service>
Step
[ name ] (svc-sip)[service]#[no] default
1
server ( (manual <host> [<port>]) | auto )
[ loose-router | strict-router ]
Gateway configuration task list
Command
40 • SIP gateway configuration
Purpose
Set IP address with optional port, which is
used as default server. Auto sets the default
server always to the actual registration con-
tact, and updates when a new contact is
treated as registrar.
516