Snmp Configuration; Dhcp Configuration; Cs Interface; Isdn Interface - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
• Chapter 18, "RIP configuration"
(RIP) and describes the tasks involved in configuring RIP features within SmartWare.
• Chapter 19, "Access control list configuration"
and describes the tasks involved in their configuration through SmartWare.
• Chapter 20, "SNMP configuration"
simple network management protocol (SNMP) and describes the tasks used to configure those of its features
supported by SmartWare.
• Chapter 21, "SNTP client configuration"
tocol (SNTP) client.
• Chapter 22, "DHCP configuration"
control protocol (DHCP) and describes the tasks involved in its configuration.
• Chapter 23, "DNS configuration"
(DNS) component.
• Chapter 24, "DynDNS configuration"
(DynDNS) service.
• Chapter 25, "PPP configuration"
different link layers.
• Chapter 26, "VPN configuration"
two SmartNodes or between a SmartNode and a third-party device.
• Chapter 27, "CS context overview"
text and its associated components and describes the tasks involved in its configuration.
• Chapter 28, "CS interface configuration"
describes the tasks involved its configuration.
• Chapter 29, "ISDN interface configuration"
tasks involved in their configuration.
• Chapter 30, "FXS interface configuration"
tasks involved their configuration.
• Chapter 31, "FXO interface configuration"
tasks involved in configuring them.
• Chapter 32, "H.323 interface configuration"
H.323 gateways and describes the specific tasks involved in their configuration.
• Chapter 33, "SIP interface configuration"
gateways and describes the specific tasks involved in their configuration.
• Chapter 34, "Call router configuration"
tables and call services and describes the tasks involved in configuring the call router in SmartWare.
• Chapter 35, "Tone configuration"
and tone-set profiles and describes the tasks involved in their configuration.
on page 202 provides an overview of the routing information protocol
on page 212 provides an overview of IP access control lists
on page 226 on page 238 provides overview information about the
on page 241 describes how to configure a simple network time pro-
on page 251 provides an overview of the dynamic host configuration
on page 261 describes how to configure the domain name system
on page 265 describes configuring the dynamic DNS
on page 270 describes how to configure the point-to-point protocol over
on page 287 describes how to configure the VPN connections between
on page 305 gives an overview of SmartWare circuit-switching (CS) con-
on page 327 gives an overview of interfaces in the CS context and
on page 336 provides an overview of ISDN interfaces, and the
on page 350 provides an overview of FXS interfaces, and the
on page 357 provides an overview of FXO interfaces and the
on page 369 provides an overview of H.323 interfaces used by
on page 379 provides an overview of SIP interfaces used by SIP
on page 392 provides an overview of call router tables, mapping
on page 457 gives an overview of SmartWare call-progress-tone profiles
About this guide
28