Receive Direction - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Mode: interface sip <interface>
Step
[ name ] (if-sip)[ interface ]#address-transla-
1
tion outgoing-call diversion-header
host-part {call | default-server | domain
| fix | interface | none}

Receive Direction

For receiving of the Diversion Header, an incoming address translation expression must be configured on the
sip interface. Because several methods for transmitting redirecting information are available, this expression
specifies that they must be taken from the Diversion Header for providing them to the call control.
Mode: interface sip <interface>
Step
[ name ] (if-sip)[ interface ]#address-transla-
1
tion incoming-call calling-redir diver-
sion-header
SIP interface configuration task list
Command
Command
33 • SIP interface configuration
Purpose
Enables or disables sending of the Diversion
Header and specifies the Host Part of the URI.
call: If available, the Host Part of the calling
from-header will be taken else the local ip
address.
default-server: The ip address of the con-
figured default-server will be taken.
domain: The configured domain name will be
taken.
fix: Allows to specify a user configured Host
Part.
interface: The local ip address will be
taken.
none: Disables sending of the Diversion
Header.
Purpose
Enables or disables extracting of the redirec-
tion information from the Diversion Header.
390