Changing The Sip Transaction Timeout; Troubleshooting - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Changing the SIP transaction timeout

The following command changes the SIP transaction timeout from the default of 32 seconds to a user-
selected value.
Mode: gateway sip <sip>
Step
1 [ name ] (gw-sip)[ gw-name ]# transaction
timeout <seconds>

Troubleshooting

You can display basic status information of the SIP gateway and the registration state of its users using the fol-
lowing command:
Mode: Configure
Step
1
node (gw-sip)[sip]# show gateway sip sta-
tus [detail]
Example: Display SIP gateway status information
The following example shows how to display SIP gateway status information and a sample output of the com-
mand.
node(cfg)#show gateway sip status
SIP Gateway: sip
================
State:Up
User Agent:0xb69ef0
Local Address:172.16.32.19:5060
Allocated Endpoints:0
Allocated Sessions:0
Allocated Audio Datapath Controllers:0
Gateway configuration task list
Command
Command
40 • SIP gateway configuration
Purpose
Sets the transaction timeout to the
specified value.
Purpose
Displays SIP gateway status information. The
detail parameter is a number in the range 0
to 5 and indicates how much detail should
be displayed.
514