Changing The Sip Transaction Timeout; Re-Registering Timeout In Case Of General Errors; Re-Registering Timeout In Case Of Client Error; Re-Registering Timeout In Case Of Server Error - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Changing the SIP transaction timeout

The following command changes the SIP transaction timeout from the default of 32 seconds to a user-
selected value.
Mode: gateway sip <sip>
Step
1 [ name ] (gw-sip)[ gw-name ]# transaction
timeout <seconds>

Re-registering timeout in case of general errors

The following command configures the registration timeout in case of internal or procedural errors.
Mode: gateway sip/service
Step
[ name ] (svc-sip)[ service ]# registration-
1
timeout general-error [<seconds>]

Re-registering timeout in case of client error

The following command configures the registration timeout in case of client error.
Mode: gateway sip/service
Step
[ name ] (svc-sip)[ service ]# registration-
1
timeout client-error [<seconds>]

Re-registering timeout in case of server error

The following command configures the registration timeout in case of server error.
Mode: gateway sip/service
Step
[ name ] (svc-sip)[ service ]# registration-
1
timeout server-error [<seconds>]
Gateway configuration task list
Command
Command
Command
Command
45 • SIP gateway configuration
Purpose
Sets the transaction timeout to the
specified value.
Purpose
Configure the registration timeout in case of
internal or procedural errors. Default value is
10 seconds.
Purpose
Configure the registration timeout in case of
client error, when a status code of 4xx was
received. Default value is 10 seconds.
Purpose
Configure the registration timeout in case of
server error, when a status code of 5xx was
received. Default value is 10 seconds.
555