Table of Contents
Advertisement
ADVANCED FEATURES
Inbound Routing
Setting the Routing Parameters
The DP-2500/3000 can route documents received from a G3 fax machine to email address(s) or to Internet
Fax machine(s) connected to a LAN as an email, as well as to other G3 fax machine(s) over the telephone line.
To use this feature, the Fax Parameter No. 152 (SUB-ADDRESS ROUTING) and/or No. 153 (TSI ROUTING)
must be set to "Valid".
No. 152 (SUB-ADDRESS ROUTING): Set this parameter to perform an ITU-T sub-address query within its
auto dialer and to route the received document(s) to the corresponding stations email address(s) or telephone
number(s).
No. 153 (TSI ROUTING): Set this parameter to perform a Numeric ID (TSI frame information) query within its
auto dialer and to route the received document(s) to the corresponding stations email address(s) or telephone
number(s).
No. 154 (ROUTE HEADER FORMAT): Use this parameter to select the type of email header to be included in
the "From:" field of each routed faxes. (Default setting is "Originator")
Originator : The originating fax machine's TSI will appear in the "From:" field of the routed email.
Relay Station : The routing station's email address will appear in the "From:" field of the routed email.
No. 155 (PRINT ROUTED DOCUMENT) : Set this parameter to select whether a received fax to be routed is
always printed on the DP-2500/3000 or only when the routing operation fails.
Entering Phone Book Dialing Numbers for Inbound Routing
If the Inbound Routing parameters are set, an ITU-T sub-address and/or originator's Numeric ID (TSI frame
information) can be programmed with each email address in Phone Book numbers.
Make sure that the INTERNET lamp is ON. If not, press
1
90
EDIT PHONE BOOK
to select the "INTERNET MODE".
PHONE BOOK
SELECT A FUNCTION
01 ADD TELEPHONE
02 ADD EMAIL ADDR.
03 MODIFY STATION
04 DELETE STATION
05
CANCEL
O K
Advertisement
Table of Contents
