Customizing Your Machine; Setting The Fax Parameters - Panasonic 3000 Operating Instructions Manual

Customizing Your Machine

Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be
temporarily changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
by the procedure described below.

Setting the Fax Parameters

Make sure that the INTERNET lamp is ON. If not, press
1
2
SET MODE
3
Press or
Parameter. (See pages 52 to 57)
Ex: 004 STAMP (HOME)
Enter the Fax Parameter number directly from the keypad
and press
Continued on the next page...
04 FAX PARAMETERS
to scroll the display to the desired Fax
or
SET or key.
START
PROGRAMMING YOUR MACHINE
to select the "INTERNET MODE".
SELECT A FUNCTION
DEFERRED COMM.
ADVANCED COMM.
EDIT FILE MODE
SET MODE
FAX PARAMETERS
SELECT A FUNCTION
001 CONTRAST (HOME)
002 RESOLUTION (HOME)
003 ORIGINAL (HOME)
004 STAMP (HOME)
005 MEMORY (HOME)
01/33
POLLING
SELECT MODE
PRINT OUT
EDIT PHONE BOOK
CANCEL O K
51