Setup Procedure; Before Setting Up - Panasonic DP-130 Series Setup Procedure

Setup Procedure

Before setting up

Unpack and install on a stable flat surface.
Check that you have all the contents illustrated.
Note: Do not plug the copier until directed to do so.
Copier
Toner Cartridge
(1 piece)
Minimum Space Requirement
Use only the setup units/parts designated by Panasonic. If the copier should
C
ATTENTION
be damaged by using other setup units/parts, Panasonic will not bear any
responsibility.
Drum unit already comes installed in copier.
C
100 mm
300 mm
Exit Tray Copier
2
Operating Instructions
For Copier (1 piece)
C
For Facsimile (1 piece)
C
CD-ROM (1 piece)
C
Setup Guide (1 piece)
C
Cable
Packed in the paper tray
C
700 mm
Sheet Bypass