Receive To Memory; Setting Rcv To Memory Password; Setting The Rcv To Memory; Printing Documents - Panasonic Workio DP-8020 Operating Instructions Manual

This feature is used to secure all
received documents by storing
them into memory. To print the
document(s) received in memory,
the authorized operator must
enter the correct password.
aaa bbb
Memory
aaa
NOTE
92
Advanced Facsimile Features

Receive To Memory

Setting RCV To Memory Password

1
ccc
5
37 RCV TO MEMORY

Setting the RCV To Memory

bbb
1
ccc

Printing Documents

After receiving documents with the Receive To Memory feature, the following
message will appear on the display.
1
MESSAGE IN MEMORY
1. When the memory overflows, the machine will stop receiving, and release the line. The
machine will not answer the next incoming call until there is space available in memory.
2. We recommend that optional flash memory card is installed when this function is used. See
page 178 on Image Memory Capacity.
3. If the password has not been set, your machine will not prompt you to enter the password. The
document(s) will be printed immediately after pressing
If set on other
function mode.
1234
If set on other
function mode.
If set on other
function mode.
< RCV TO MEMORY >
2
2
2
in Step 4.
SET