Lifting Procedure - Trane R Series Installation Operation & Maintenance

Installation - Mechanical
WARNING
Heavy Objects!
Do not use cables (chains or slings) except as shown. Each of the
cables (chains or slings) used to lift the unit must be capable of
supporting the entire weight of the unit. Lifting cables (chains or
slings) may not be of the same length. Adjust as necessary for
even unit lift. Other lifting arrangements may cause equipment or
property-only damage. Failure to properly lift unit may result in
death or serious injury. See details below.

Lifting Procedure

Attach chains or cables to lifting beam. The total lifting weight, lifting weight
distribution and required lifting beam dimensions are shown in Figures 2, 7
and 10 and on the rigging diagram shipped with each unit. Lifting beam
crossbars must be positioned so lifting cables do not contact the sides of the
unit.
16 RLC-SVX07A-EN