Dynamics Gain Controls And Meters; Output Meter And Clip Indicator; Gain Reduction Meter - DigiDesign D-Command Manual

Dynamics Gain Controls and Meters

Clip Indicator
Output meter

Gain Reduction meter

Level meters in the Dynamics section

Output Meter and Clip Indicator

The Output meter shows the output level for the current
plug-in. The Clip indicator lights when a clip is reported by
the plug-in, and can be cleared by pressing the Clear Clip
switch in the Session Management section.
Gain Reduction Meter
The Gain Reduction meter shows the amount of gain reduc-
tion for Compressor/Limiter functions (using the range
shown on the left) and Expander/Gate functions (using the
range shown on the right).
Chapter 7: Plug-in Controls 59