Luminous Indicator Signals - Visonic POWERMAX User Manual

Dear Customer,
Thank you for choosing PowerMax - a highly advanced wireless alarm control system produced by Visonic Ltd.
Please note below the installer's telephone number to facilitate obtaining assistance.
Company Name: ______________________________________
Telephone Number: ___________________________________
Person to Contact: ____________________________________
Also please make sure that you have the name and telephone number of the central station your system will report to. If
you ever call the central station to ask questions, you should be able to come up with your "ACCOUNT NUMBER" used
to identify your alarm system to the central station. Obtain this information from your installer and write it down below.
Monitoring Station's Name _____________________________
Telephone Number: ___________________________________
My Account Number: __________________________________
If your system was set by the installer to contact private telephone numbers, note down the 3 telephone numbers that
your installer programmed to be called besides the "follow-me" number:
Phone No. 1: _________________________________________
Phone No. 2: _________________________________________
Phone No. 3: _________________________________________
Phone No. 4: Follow-me (see paragraph 7.6 )
Sound
(-)
(- -)
(- - -)
☺
(- - - –––––)
(––––––––)
Slow beeping at first (- - - - - -)
and faster beeping throughout the
last 10 seconds (- - - - - - - - ).
(–––––––––––––––––––––––––––)
(ding-dong)
LED Behavior
ARM Lights steadily
Flashes
No light
TROUBLE Lights steadily
No light
Lights steadily
CHIME
No light
POWER Lights steadily
No light
2
SUMMARY OF AUDIBLE SIGNALS
Sequence
Once only
Once only
Once per minute
Once only
Once only
Once only, throughout a
time delay determined by
the installer.
Continuous tone upon
arming (lasts until the
last 10 seconds of the
exit delay)
Once only

LUMINOUS INDICATOR SIGNALS

Significance
The system is in the armed state (AWAY MODE)
The system is in the armed state (HOME MODE)
The system is presently in the disarmed state
A state of trouble is presently being detected
No trouble - all is well.
The chime function is active - chime zones will chime when disturbed
The chime function is inactive - chime zones will not chime when disturbed
AC power is supplied to the control panel
The system is operating on backup battery power.
Significance
A key in the keypad has been pressed
The system reverts automatically to the previous state
A state of trouble is presently being detected
Command / operation carried out successfully
Illegal command - wrong code - refusal to obey
Exit delay warning upon arming the system; also entry
delay warning upon entry via a delay zone.
"Forced arming" is taking place while the system is "not
ready" (the tone stops by clicking the arming button once
more).
A chime zone is being disturbed (while the system is in
the disarmed state).
DE5450U